With the growing of industry, equipment manufacturers have been putting their best effort to build modern full size wheel loader. They try to come up with improved features to increase productivity of various activities which use the advantage from the front loader shovel from construction, material handling, and so on. They also add grapple or mask forklift, so it can handle more task types. Those improvements are far from useless, but to find the suitable tool that could provide the right and specific service; you need to pay attention to its specs. Here is the information on some common specs to get you familiar with the equipment.
The Full Size Wheel Loader Specs to Consider
Bucket and load capacity
The machine’s bucket and load capacity is the primary feature you need to consider upon the purchase, because it is meant to be a workhorse. There are two specs that determine its capacity, bucket capacity and breakout force.
Full size wheel loader bucket capacity can range from 0.65 cubic yards to 32 cubic yards. The breakout force can range from 9,000 lbs to 47,000 lbs.
If your job site is located on lavish ground or near artificial lawn, as well as granite, brick, or paved pathways which is susceptible to damage, the full size wheel loader operating weight might be an important consideration. Consult about the weight restrictions on ground with the dealer. The equipment weight ranges between 12,000 lbs to 75,000 lbs.
Tipping load is one of the most important things to consider, because with the over amount of tipping load, you can ruin the project and get into trouble, which have to be avoided. You need to factor the tipping load with the project needs and the intended use.
There are two kinds of tipping load, straight and full turn. The straight capacity ranges widely from 8,100 lbs to 56,000 lbs. The full turn range starts from 7,200 lbs to 48,000 lbs.
Most manufacturers designed the tire for exterior use on uneven and rough surface, resulting in various tread depths in tire sizes, to allow the operator navigate on different terrain such as sand and loose dirt as well as stacked recycled waste and other refuses.
The full size wheel loader tire diameter ranges a lot from 48 inch to 63 inch. The wide can be anywhere from 12 inch to 24 inch. Its tread depths can be cut a light as 28 inch or as heavy as 39 inch.
Back in 1996, the Tier 1 to Tier 3 engine emission standards are determined by the horsepower rating (11 hp to 750 hp). If you purchased used engine, check the manufactured year. If it’s made in 1996-2000, then it used T1, if it’s made in 2001 to 2006 then it used T2, and if it’s made in 2006-2008, it used T3. Almost any models that are available these days will feature Interim Tier 4 as its engine that already emission certified.
The information on full size wheel loader specs above may give you some understanding on the machine. However, to dig more about the best models to work with, it is always best to ask qualified dealers. They can help you to make the buying decision and offer the specs you need to handle your work.
Soccer lover, traveler, fender owner, Bauhaus fan and multidisciplinary designer. Performing at the junction of modernism and sustainability to create great work for living breathing human beings. I work with Fortune 500 companies and startups. I happy in writing about excavator & wheel loader.